Multi-layer Wave Spring for Compact Axial Applications
A multi-layer waveform spring is a precision elastic component
engineered to deliver significant axial force within minimal space
constraints. This innovative design combines multiple wave-shaped
spring layers, offering space savings of over 50% compared to
conventional helical springs while maintaining comparable load
capacity.
Design Architecture and Working Principle
Available in 2, 3, 4, 5 or more layers, these springs can be
configured in opposed or stacked arrangements. Stacked
configurations increase spring force, while opposed arrangements
provide greater deflection. This flexibility gives engineers
additional design variables beyond traditional wire diameter and
coil length parameters.
Technical Specifications
| Parameter | Range |
|---|
| Inner Diameter | 8-300 mm |
| Outer Diameter | 12-320 mm |
| Free Height | 2.0-50 mm |
| Working Travel | 0.5-20 mm |
| Load Capacity | 10 N to 20,000 N |
| Wave Count Options | 3, 4, 5, 6 and custom designs |
Material Selection
Material options include 50CrVA, 65Mn, 301 stainless steel, 304
stainless steel, 17-7PH and Inconel alloys. Operating temperature
ranges vary by material:
- Spring Steel: -40 to 120°C
- Stainless Steel: -60 to 250°C
- High-Temperature Alloys: Up to 600+°C
Manufacturing Precision
High-precision CNC winding and forming ensures consistent
performance with tight tolerances:
- Inner Diameter Tolerance: ±0.1 mm
- Free Height Tolerance: ±0.05 mm
- Load Tolerance: ±8%
Industrial Applications
Particularly suited for industrial robots, these springs excel in:
- Robot joint mechanisms
- Reduction gear assemblies
- Servo-motor bearing arrangements
- End-effector mechanisms
Surface Treatment Options
Available surface treatments include blackening, zinc plating,
passivation, Dacromet and zinc-aluminum coatings. Carbon steel
typically receives blackening treatment, while stainless steel is
normally passivated.
Customization Capabilities
Jiangsu Sunzo provides comprehensive customization services
including selection calculation, working-condition analysis and
structural optimization. For custom orders, provide installation
dimensions, target load, working travel, cycle requirements,
temperature, and any corrosion or cleanliness constraints.
Frequently Asked Questions
What is a multi-layer waveform spring?
A wave-shaped elastic component made from multiple formed layers to
provide controlled axial force in a compact package.
What load range is available?
10 N to 20,000 N, depending on geometry and material selection.
Can dimensions be customized?
Yes, smaller or larger dimensions and customized specifications can
be evaluated and produced.
Engineering Support: Jiangsu Sunzo Elastic Technology Co., Ltd. provides comprehensive
technical evaluation from drawings, samples or application data,
connecting spring design with your specific installation space,
load requirements and operating environment.
